Premium roof insulation for every season. Experience year-round comfort with the CoolTech Hot & Cool Tile, an innovative roof insulation tile designed to reduce heat transfer, improve indoor comfort and enhance the durability of your roof.
Ideal for RCC roofs, homes, factories and commercial buildings, this strong, durable and long-lasting tile features a water-resistant cement surface that keeps your home cooler in summer and warmer in winter, while also reducing outside noise and helping lower electricity consumption. Proudly made in Pakistan and backed by 26 years of CoolTech experience.
Garmi bhi door, Sardi bhi door – Har Mausam Behtareen! Upgrade your roof with a modern insulation solution that delivers comfort, energy efficiency and reliable performance throughout the year. Learn more about the tile.
CoolTech Plus '100 is a water-based, high-solids, ceramic heat reflection coating. This highly effective radiant barrier and heat-reflecting roof coating is designed for maximum thermal efficiency, with up to 90% reflectivity, UV resistance and years of trouble-free service. It is our most versatile product for roof heat reflection and insulation, backed by a 5-year warranty.
To apply, clean the roof thoroughly so there is no dust, oil, grease or any other stain left on the surface. For the best performance, wash the roof with water only (detergent is not required); proper cleaning prevents the coating from peeling off.
Next, add water to the bucket according to the water addition ratio guide included with your order, stir thoroughly and apply with a brush. Once the first coat has dried, apply the second coat. The coating dries in about 2 hours, but avoid using the roof for the first 24 hours for best results.
CoolTech Advance '30 is a water-based, high-solids, ceramic heat reflection coating. This highly effective radiant barrier and heat-reflecting roof coating is designed for thermal efficiency, with up to 70% reflectivity, UV resistance and years of trouble-free service. A highly effective product for roof heat reflection and insulation, backed by a 3-year warranty.
To apply, clean the roof thoroughly so there is no dust, oil, grease or any other stain left on the surface. For the best performance, wash the roof with water only (detergent is not required); proper cleaning prevents the coating from peeling off.
Next, add water to the bucket according to the water addition ratio guide included with your order, stir thoroughly and apply with a brush. Once the first coat has dried, apply the second coat. The coating dries in about 2 hours, but avoid using the roof for the first 24 hours for best results.
CoolTech Total '20 is a water-based, high-solids, ceramic heat reflection coating. This radiant barrier and heat-reflecting roof coating offers up to 50% reflectivity, UV resistance and years of trouble-free service, backed by a 2-year warranty.
To apply, clean the roof thoroughly so there is no dust, oil, grease or any other stain left on the surface. For the best performance, wash the roof with water only (detergent is not required); proper cleaning prevents the coating from peeling off.
Next, add water to the bucket according to the water addition ratio guide included with your order, stir thoroughly and apply with a brush. Once the first coat has dried, apply the second coat. The coating dries in about 2 hours, but avoid using the roof for the first 24 hours for best results.
Aqua Cool '021 is a combination of CT Plus '100 and Aqua Guard '220, designed to protect your roof from seepage, leakage and heat. It is specially formulated for surfaces that have already been affected by cracks, which can weaken the roof surface. With Aqua Cool '021, your roof reflects sunlight and is protected against water seepage and leakage.
Aqua Cool '021 comes ready to apply: on a smooth cemented surface, apply 2–3 coats. Every surface has a different application method, so we'll guide you on the right method for your roof on WhatsApp when confirming your order.
Aqua Guard '220 is a one-component, acrylic co-polymer-based flexible waterproofing system ideal for cementitious and metal surfaces. It is suitable for roof waterproofing in damp conditions where other systems may not be applicable, and is highly effective against seepage and leakage.
To apply, clean the roof thoroughly so there is no dust, oil, grease or any other stain left on the surface. Wash the roof with water only for the best performance (detergent is not required); proper cleaning prevents Aqua Guard '220 from peeling off.
Apply the first coat with a brush and let it dry completely before the next one. Apply 2–3 coats in total on a smooth cemented surface; for highly porous areas, apply a minimum of 3 coats. We'll guide you on the right method for your roof on WhatsApp when confirming your order.
Aqua Bond '320AB is a single-component waterproofing crack binding paste for walls and floors, reinforced with polypropylene fiber. It comes ready to apply and is best for filling cracks on concrete roofs, walls, floors, corners and edges, with excellent adhesion, crack bridging capability and weathering resistance.
To apply, clean the cracks and remove any dust, oil, grease or loose material. Use the scraper or your fingertip to press the paste into the crack, and repeat 2 to 3 times at 20-minute intervals. Any leftover material can be used within 2–3 months of the first application.
A lead replacement, self-adhesive butyl flashing strip, ideal for emergency repairs. It gives an instant waterproof seal once applied. Grey finish, quick and easy to use, for wood, glass, metal, brick, cement, roofs and gutters. Curing is immediate at normal temperature.
Make sure the surface is clean, dry, able to bear load and free from grease and dust; remove any loose dirt with a wire brush and soft broom.
Unroll the tape and cut it to the length you need. Peel off the backing strip and place the adhesive side onto the prepared surface. Press the tape down firmly with a roller or your fingertips to avoid air pockets and creases, paying special attention to the edges and ends for a secure seal.
The cost of heat proofing depends on the roof surface area and the product you choose. If you buy our DIY buckets and apply them yourself, you save on application costs. See current prices in our online shop, or contact us for a quote for professional application.
1. A CoolTech white heat reflective coating reflects up to 90% of the sun's heat and protects your roof from ultraviolet rays.
2. CoolTech Hot & Cool insulated tiles add insulation that keeps your home cooler in summer and warmer in winter.
3. Heat-resistant sheets can also reduce indoor temperature, but they cost nearly 5 times as much as a roof coating.
CoolTech’s roof heat proofing coating can be applied to all types of roofs to prevent heat. It has been a reliable and sustainable heat proofing solution for over 25 years.
CoolTech’s roof coating helps reduce heat, especially in hot and humid weather when other solutions don't work.
CoolTech offers several roof coatings depending on your needs. Our heat proofing coating comes in three grades: CT Plus '100 (up to 90% heat reflection, 5-year warranty), CT Advance '30 (up to 70%, 3-year warranty) and CT Total '20 (up to 50%, 2-year warranty). For roofs that also need waterproofing, Aqua Cool '021 combines heat proofing and waterproofing in one product.
A reflective, insulated roof keeps your house coolest. A CoolTech heat reflective coating reflects up to 90% of the sun's heat, and Hot & Cool insulated tiles add insulation that also keeps your home warmer in winter. Both reduce the need for air conditioning and lower your electricity bills.
A cool roof is made of a material or has a coating that can lower the roof surface temperature, decreasing the amount of heat transferred into a residential or commercial building. In general, traditional roofs absorb sunlight during the day, heating the building and the surrounding air.
It's not your imagination – surface material has a lot to do with temperature. Move from the blacktop to the grass and you can instantly feel the difference. It's exactly the same with roofs. Uncoated roofs absorb light — up to 90% of solar energy — and convert it to heat, emitting it back into the atmosphere.
Our coatings come with warranties of 2 to 5 years depending on the product: CT Plus '100 (5 years); CT Advance '30, Aqua Cool '021 and Aqua Guard '220 AG (3 years); and CT Total '20 (2 years). When a coating reaches the end of its warranty, the roof can be recoated and a new warranty begins. The process can be repeated, making roof coating a renewable and sustainable roofing system.
It depends on your roof:
1. Aqua Guard '220 AG: a ready-to-apply acrylic co-polymer waterproofing coating, best for seepage and leakage (2–3 coats, 3-year warranty).
2. Aqua Cool '021: waterproofing and heat proofing in one, made for roofs already affected by cracks.
3. Aqua Bond '320AB: a fiber-reinforced paste for filling cracks in roofs, walls and floors.
4. Butyl Waterproof Sealing Tape: a self-adhesive tape for instant, emergency leak repairs.